Sable V6-182 3.0L (1986)
Figure 2
3.
To install the (driver's side) windshield wiper arm position the arm's articulating link to the pivot pin and engage onto the pin (see Figure 2, View
A).
4.
Position the bottom surface of the wiper arm parallel with the top surface of the leaf screen louvers, ensuring the arm rests against the top surface
of the leaf screen. Install the arm onto the pivot shaft with the latch slide in the unlatched (outward) position (see Figure 2, View A).
5.
While applying downward pressure on the arm head, to ensure full seating, raise the other end of the arm sufficiently to allow the latch to slide
under the pivot shaft to the latched position.
6.
Lift the (latched) arm away from the top surface of the leaf screen louvers and position the arm only on the rearward surface of the wiper arm stop.
7.
Make sure the blade is fully seated onto the arm and the arm is against (rearward of) the wiper stop before operating the wipers to verify the
condition.
